connector accessories glenair, inc. ? 1211 air way ? glendale, ca 91201-2497 ? 818-247-6000 ? fax 818-500-9912 printed in u.s.a. www.glenair.com cage code 06324 ? 2010 glenair , inc. e- mail: sales@glenair.com h-18 h connector designators mil-dtl-38999 series i, ii (f) mil-dtl-38999 series iii and iv (h) f-h rotatable coupling type b individual and/or overall shield termination 380-115 emi/rfi non-environmental backshell with strain relief type b - rotatable coupling - low profle basic number product series shell size 380 f a 115 nf 15 08 m 6 connector designator angle and profle a - 90 b - 45 h - 45 j - 90 s - straight finish dash no. strain relief style (h, a, m, d) length: s only (1/2 inch increments e.g. 6 = 3 inches) style h heavy duty (table x) style a medium duty (table xi) style d medium duty (table xi) style m medium duty (table xi) cable range p n glenair max m .135 (3.43) cable range .880 (22.35) 45 & 90 style ii (see note 3) max (table i) sym s - straight knurl style mfr (table i) a thread typ b typ length (see note 2) d (table iv) c o sym a - 90 (table iv) r s (table iv) sym j - 90 (table iv) u (table iv) t sym h - 45 (table iv) e o sym b - 45 (table iv) f (table iv) straight style ii length (see note 2) (see note 3) l j cable range glenair l k cable range
connector accessories glenair, inc. ? 1211 air way ? glendale, ca 91201-2497 ? 818-247-6000 ? fax 818-500-9912 printed in u.s.a. www.glenair.com cage code 06324 ? 2010 glenair , inc. e- mail: sales@glenair.com h-19 h 380-115 emi/rfi non-environmental backshell with strain relief type b - rotatable coupling - low profle application notes 1. assembly identifed with manufacturer s name and part number, space permitting. 2. standard minimum length for style i is 1.500 inches, style ii standard length is 2.000 inches.for shorter lengths consult factory . appklies to symbol s only. 3. when cable range exceeds max entry shown in t able iv, style ii will be supplied. note: c, d, e, f, r, s, t and u dimensions do not apply to style ii. 4. metric dimensions are in parentheses. 5. for ef fective grounding, connector with conductive fnish should be used. 6. glenair series 600 backshell assembly tools are recommended for assembly and installation. 7. material/finish: elbow , adapter, coupling nut, ferrules and clamp - aluminim alloy or sst/table ii. hardware - cres/passivate 8. angular functions a and b are currently not available in shell sizes 40, 44 and 61. consult factory for suitable alternatives. * not available in style m clamp. ** not applicable style d table iv (continued): cable clamp cable range dash no. w max x max y max z max cable range min** max 03* .437 (11.1) .760 (19.3) .843 (21.4) .630 (16.0) .156 (4.0) .250 (6.4) 04* .437 (11.1) .760 (19.3) .906 (23.0) .755 (19.2) .188 (4.8) .312 (7.9) 06 .500 (12.7) .760 (19.3) 1.093 (27.8) .942 (23.9) .281 (7.1) .438 (11.1) 08 .563 (14.3) .760 (19.3) 1.187 (30.1) 1.067 (27.1) .344 (8.7) .562 (14.3) 10 .563 (14.3) .760 (19.3) 1.281 (32.5) 1.192 (30.3) .375 (9.5) .625 (15.9) 12 .563 (14.3) .760 (19.3) 1.500 (38.1) 1.380 (35.1) .438 (11.1) .750 (19.1) 16 .656 (16.7) 1.073 (27.3) 1.719 (43.7) 1.535 (39.0) .562 (14.3) .938 (23.8) 20 .656 (16.7) 1.323 (33.6) 2.062 (52.4) 1.848 (46.9) .750 (19.1) 1.250 (31.8) 24 .656 (16.7) 1.323 (33.6) 2.312 (58.7) 2.255 (57.3) .781 (19.8) 1.375 (34.9) 28 1.188 (30.2) 1.572 (39.9) 2.719 (69.1) 2.505 (63.6) .969 (24.6) 1.625 (41.3) 32* 1.187 (30.1) 1.572 (39.9) 2.969 (75.4) 2.755 (70.0) 1.125 (28.6) 1.875 (47.6) 40* 1.125 (28.6) 1.572 (39.9) 3.531 (89.7) 3.255 (82.7) 1.469 (37.3) 2.375 (60.3) table iv: cable clamp cable range dash no. n max p max cable range min max 04 .780 (19.8) .957 (24.3) .125 (3.2) .312 (7.9) 06 .780 (19.8) 1.145 (29.1) .250 (6.4) .437 (11.1) 08 .780 (19.8) 1.332 (33.8) .312 (7.9) .562 (14.3) 10 .780 (19.8) 1.332 (33.8) .350 (8.9) .625 (15.9) 12 .811 (20.6) 1.551 (39.4) .500 (12.7) .750 (19.1) 16 .905 (23.0) 1.770 (45.0) .625 (15.9) .937 (23.8) 20 1.092 (27.7) 2.113 (53.7) .875 (22.2) 1.250 (31.8) 24 1.124 (28.5) 2.363 (60.0) 1.000 (25.4) 1.375 (34.9) 28 1.399 (35.5) 2.770 (70.4) 1.250 (31.8) 1.625 (41.3) 32 1.399 (35.5) 3.020 (76.7) 1.437 (36.5) 1.875 (47.6) table iii: elbow dimensions shell size c max d max e max f max r max s max t max u max a f,l,s h 08 08 09 .500 (12.7) 1.684 (42.8) 457 (11.6) 1.674 (42.5) .910 (23.11) 1.910 (48.77) .780 (19.81) 1.780 (45.21) 10 10 11 .595 (15.1) 1.804 (45.8) .520 (13.2) 1.734 (44.0) .970 (24.64) 1.970 (50.04) .810 (20.57) 1.810 (45.97) 12 12 13 .610 (15.5) 1.824 (46.3) .582 (14.8) 1.794 (45.6) 1.030 (26.16) 2.030 (50.56) .830 (21.08) 1.830 (46.48) 14 14 15 .700 (17.8) 1.894 (48.1) .645 (16.4) 1.884 (47.9) 1.090 (27.68) 2.090 (53.09) .850 (21.59) 1.850 (46.99) 16 16 17 .885 (22.5) 1.984 (50.4) .738 (18.7) 1.994 (50.6) 1.150 (29.21 2.150 (54.61) .880 (22.35) 1.880 (47.75) 18 18 19 .975 (24.8) 2.154 (54.7) .926 (23.5) 2.184 (55.5) 1.200 (30.48) 2.200 (55.88) .900 (22.86) 1.900 (48.26) 20 20 21 .975 (24.8) 2.154 (54.7) .926 (23.5) 2.184 (55.5) 1.270 (32.26) 2.270 (57.66) .930 (23.62) 1.930 (49.02) 22 22 23 1.125 (28.6) 2.264 (57.5) 1.020 (25.9) 2.334 (59.3) 1.330 (33.78) 2.330 (59.18) .950 (24.13) 1.950 (49.53) 24 24 25 1.125 (28.6) 2.264 (57.5) 1.020 (25.9) 2.334 (59.3) 1.390 (35.31) 2.390 (60.71) .980 (24.13) 1.980 (50.29) 28 1.225 (31.1) 2.434 (61.8) 1.145 (29.1) 2.384 (60.6) 1.460 (37.08) 2.460 (62.48) 1.150 (29.21) 2.150 (54.61) 32 1.575 (40.0) 2.684 (68.2) 1.207 (30.7) 2.484 (63.1) 1.590 (40.38) 2.590 (65.79) 1.210 (30.73) 2.210 (56.13) 36 1.775 (45.1) 2.684 (68.2) 1.238 (31.4) 2.574 (65.4) 1.690 (42.93) 2.690 (68.33) 1.240 (31.50) 2.240 (56.90) 40 n/a n/a n/a n/a 1.900 (48.26) 2.200 (55.88) 1.250 (31.75) 1.590 (40.38) 44 n/a n/a n/a n/a 2.030 (51.56) 2.360 (59.94) 1.300 (33.02) 1.640 (41.65) 48 n/a n/a n/a n/a 2.180 (53.37) 2.530 (64.26) 1.370 (34.79) 1.720 (43.68) 61 n/a n/a n/a n/a 1.290 (32.76) 1.490 (37.85) .880 (22.35) 1.100 (27.94) table ii: finishes sym finish b cadmium plate, olive drab c* anodize, black g* hard coat, anodic j gold iridite over cadmium plate over nickel lf cadmium plate, bright over electroless nickel m electroless nickel n cadmium plate, olive drab over nickel nc zinc cobalt, dark olive drab nf cad/o.d. over electroless nickel (1000 hr. salt spray) t cadmium plate, bright dip over nickel u** cadmium plate, black uc zinc cobalt, black z1** passivate zn zinc nickel, olive drab
|
